skip to Main Content
Call us on +27 (0) 11 468 3667 / 8

Netafim Drip Irrigation is simply another method of applying water to your garden. In terms of its purpose, it is no different to the conventional way of irrigation or overhead sprinklers. Its main aim is to provide plants with their necessary water requirements in order to blossom.

What is the difference then to Conventional Irrigation?

In the case of conventional irrigation, sprayers, sprinklers or nozzles are used to distribute the water from above the height of the plants to cover the entire landscaped area.

The third aspect is that the water lands on all the plants within its irrigation range and thus prohibits some of the water from wetting its intended target, namely the soil.

Netafim dripper lines perform exactly the same purpose in wetting the entire landscaped area, except, that it applies the water at ground level directly to the root zone and not from above.

And herein lies the difference.

When spraying from above the plant material, you allow the water being irrigated to be susceptible to wind, over spraying, and ultimately evaporation.

See illustration.


By throwing the water, it makes it susceptible to wind which blows it off its course and wastes it to undesired areas, such as paving, road sides, buildings and windows etc. Secondly, the wind sweeps some of this fine water mist into the atmosphere and evaporates it before it has chance of even wetting the desired target.

It is after all the ground we want to wet in order to get the water down to the root zone.

These, essentially, are the major benefits of Netafim Drip & Conventional Overhead Irrigation, and it is this difference that can save you between 20% – 50% on the amount of water required to feed plants their weekly optimum requirements.

The Netafim Techline pipes

Below is an illustration of how Netafim Drip Irrigation overcomes these problems
and can feed the plants their necessary water requirements without wasting any.


The Netafim Techline pipes are laid in a grid format on the ground of the landscaped area, and apply the water directly to the root zone of the plants.

From here nature does the rest of the work by moving the applied water throughout the soil by means of gravity and capillary action.

The water is also applied at a much lower flow rate, enabling the soil to absorb and move the water in a controlled fashion without flooding any areas and causing any run off waste or evaporation.

This way, Netafim Drip can assure you that the water applied is used in the right areas, applied precisely, done so in a controlled fashion and will not waste our precious commodity.

So what is Netafim Techline Dripper Pipe?

Netafim Techline pipe is not simply just a pipe with lots of holes in. It is ongoing technology being developed by Netafim over the past 50 years.

Each hole in the pipe has a pressure compensating dripper specifically and sonically welded into place at accurate intervals. Netafim Techline can be used above ground or sub-surface, is pressure compensating and has continuously self cleaning technology.

The Inline dripper is specifically designed and manufactured in such a way to allow only a certain amount of water pass through it and on to the soil surface.

The rest of the water is allowed to pass on down the pipe to be used by the other drippers within that line. Specific flow paths and a built in diaphragm within the dripper slow the water down and regulate its flow. It is a patented design and unique to Netafim.


Another unique feature of Netafim Techline is that the inline dripper is located on only a small section of the pipe wall, thus creating minimal water friction loss on the water flowing through the pipe. Friction is an important consideration within the irrigation industry as it creates loss of water pressure and flow. Secondly, the siphon end (water inlet) of the dripper is always positioned in the centre of the pipe. This means that no matter how the pipe lies on the ground, the dripper will always suck water from the stream centre.

Again this is beneficial, in that if there is any grit or dirt within the pipe, the weight of the particle and gravidity will pull it down to the lowest part of the pipe away from the centre stream and prevent it from being sucked in by the dripper.

These, essentially, are the major benefits of Netafim Drip & Conventional Overhead Irrigation, and it is this difference that can save you between 20% – 50% on the amount of water required to feed plants their weekly optimum requirements.

The dripper itself has another two unique features in that it has an anti-siphon mechanism which prevents contaminants being drawn into the dripper and is self-cleaning.

The wall thickness of Netafim Techline pipe is 1.2mm. This too is not simply by chance, is has been thoroughly researched to give the pipe enough durability and maintain its integrity within a landscape environment. Netafim Techline is also UV protected against the harmful rays of the sun and carries a 7-year warranty.

Netafim Techline is without a doubt the number one dripper pipe within the landscape industry.

Drip Irrigation Application

Netafim drip irrigation is the most efficient way to water your gardens as it puts the water right where its needed – at the roots.

Benefits of Drip Irrigation

Drip irrigation has certain definite advantages as a problem solver in difficult situations

Back To Top